Sulky Filmoplast 25 cm × 5 m in Black
€18.00per piece
Unit price €14.40 / m²
Sulky Filmoplast – for everything that cannot be hooped
€110.00per piece
Unit price €8.80 / m² · incl. VAT, plus shipping
Filmoplast is hooped on its own. You then score the backing paper, peel it off and press the fabric onto the exposed surface. That way you can stitch pieces which fit into no hoop at all.
Size: 50 cm × 25 m3 options
Colour: White2 options
Sulky Filmoplast 50 cm × 25 m in White
available to order, longer delivery time
Delivery time approx. 2 weeks
Free shipping within Germany from €50
- Material
- 75 % Cellulose, 25 % Polyester
- Colour
- Weiß
- Certificate
- OEKO-TEX® Standard 100
- Breite
- 50 cm
- Farbe
- Weiß
- Länge (m)
- 25 m
- Manufacturer
- Gunold / Sulky
All 2 variants in 50 cm × 25 m
All 6 combinations
About this range
Filmoplast ist das selbstklebende Ausreißvlies von Sulky mit 50 g/m². Es wird in den Rahmen gespannt, das Trägerpapier eingeritzt und abgezogen — dann klebt der Stoff darauf. So lassen sich Teile besticken, die sich nicht einspannen lassen: Kragen, Manschetten, Kappen, Hosentaschen. Erhältlich in Weiß und Schwarz.
Sewing tips
- Das Vlies mit der Papierseite nach oben einspannen und das Papier einritzen.
- Den Stoff aufkleben, glatt streichen und erst dann sticken.
- Nach dem Sticken das Vlies dicht am Motiv abreißen.
- Klebereste an der Nadel mit Alkohol abwischen, sonst zieht der Faden.
- Für dicke oder sehr dehnbare Stoffe die Variante Strong nehmen.
Some places simply cannot be hooped: a collar, a cuff, the front of a cap, a patch pocket already sewn on. Forcing it distorts the finished piece, or the hoop will not close at all. A self-adhesive stabiliser solves this, because only the stabiliser itself gets hooped.
The routine never changes: hoop the stabiliser paper side up, score the paper with a needle point and peel it away across the middle. The adhesive layer lies underneath. Lay the fabric on, smooth it down — and only then start the machine.
After stitching you lift the fabric off and tear the remaining stabiliser away around the design. For firm or very stretchy fabrics the same idea comes one step heavier: Filmoplast Strong at 95 g/m².
Frequently asked questions
How do I score the backing paper properly?
With a needle point or a seam ripper, held flat and cutting through the paper only. Score a rectangle slightly smaller than the hoop, so enough paper remains around the edge to keep the hoop clean.
Does the adhesive hold on smooth fabrics?
On most, yes. With very smooth or coated surfaces, test on an offcut: if the fabric lifts while stitching, pin the edges outside the design area for extra security.
When should I use Filmoplast Strong?
When the fabric is firm, stretches a lot, or the design sets many stitches. The heavy version then pushes back better; for shirting, caps and light goods the standard Filmoplast is enough.
Goes well with
Sulky Filmoplast 50 cm × 25 m in Black
€110.00per piece
Unit price €8.80 / m²
Sulky Filmoplast 50 cm × 5 m in Black
€26.00per piece
Unit price €11.56 / m²
Sulky Filmoplast 25 cm × 5 m in White
€18.00per piece
Unit price €14.40 / m²
Sulky Filmoplast 50 cm × 5 m in White
€26.00per piece
Unit price €11.56 / m²
