A sturdy snap fastener for anoraks, denim and outdoor fabrics, fitted with a tool rather than a needle. It measures Ø 12 mm. The pack holds 10 pieces. Produced from brass.
Snap fasteners belong wherever a seam should open and close again: at a cuff, a hood, a bib or a wrap jacket. Before setting, look at the spot: two layers plus interfacing hold better than one single layer of thin cloth. The two halves lock into each other and open many times over without the fabric beneath suffering.
What Nähfrei-Druckknopf Anorak, 12mm, goldfarbig 390332 is suitable for
- Fastenings on baby and children's clothing
- Cuffs, hoods and necklines
- Flaps on bags and cases
Frequently asked questions
Can a badly placed fastener be removed?
Yes, there is removal tooling for that. It rarely comes off without a trace, so test on a scrap first until position and pressure are right.
Do they survive the wash?
The parts resist corrosion and come out of the machine as they went in. For very hot washes, turn the piece inside out so nothing knocks against the drum.
Are they suitable for babywear?
Yes, that is their main field. What matters is a firm seat: a fastening that comes apart by hand should be set again before the garment goes into use.
What spacing should I keep?
As a rule of thumb the first one sits about its own width from the edge, the rest at even intervals. Marking with chalk or a pen keeps the row straight.
